TM128 Test Method for Wrinkle Recovery of Fabrics: Appearance Method
Description
TEST METHODS ARE DELIVERED AS A LINK IN YOUR EMAILED RECEIPT.
AATCC TM128-2017e2, Test Method for Wrinkle Recovery of Fabrics: Appearance
Technically equivalent to ISO 9867.
1. Purpose and Scope
1.1 This test method is for determining the appearance of the textile fabrics after induced wrinkling. It is applicable to fabrics made from any fiber or combination of fibers.
1.2 The method can be used to evaluate fabrics at their original, unwashed state or after home laundering.
2. Principle
2.1 A test specimen is wrinkled under standard atmospheric conditions in a standard wrinkling device under a predetermined load for a prescribed period of time. The specimen is then reconditioned in the standard atmosphere for textile testing and evaluated for appearance by comparison with 3-dimensional reference standards.
Copyright American Association of Textile Chemists and Colorists, RTP, NC, USA. All rights reserved.
The above information is only a summary of the AATCC test method.
Related items you may be interested in:
Use Wrinkle Recovery Replicas to evaluate specimens tested according to AATCC Test Method 128, Wrinkle Recovery of Fabrics: Appearance Method. Replace every 3 years.
The Wrinkle Tester is used to induce uniform wrinkling according to AATCC Test Method 128, Wrinkle Recovery of Fabrics: Appearance Method. Item #68391A
Clip & Clamp Units are replacement parts for the Wrinkle Tester used in AATCC Test Method 128, Wrinkle Recovery of Fabrics: Appearance Method. Order includes two clamps and two clips. Item #68392A
Replacement weights for the Wrinkle Tester used in AATCC Test Method 128, Wrinkle Recovery of Fabrics: Appearance Method. Item #68393A